Home > News > उद्योग समाचार > सीलेंट के खनन क्षेत्र को समझें(तथाकथित "स्टिकर", जब सफेद ट्यूब उत्पादन, एक व्यवसाय द्वारा खरीदा जाता है, और फिर एक ब्रांड और चिपक गया है, यह "स्टीकर" है; बेशक, व्यापारी भी एक प्रसिद्ध ब्रांड लेबल कर सकते हैं और इसे बेच सकते हैं एक
प्रमाणपत्र
उद्योग की जानकारी
हमारा अनुसरण करें

सीलेंट के खनन क्षेत्र को समझें(तथाकथित "स्टिकर", जब सफेद ट्यूब उत्पादन, एक व्यवसाय द्वारा खरीदा जाता है, और फिर एक ब्रांड और चिपक गया है, यह "स्टीकर" है; बेशक, व्यापारी भी एक प्रसिद्ध ब्रांड लेबल कर सकते हैं और इसे बेच सकते हैं एक

सीलेंट के खनन क्षेत्र को समझें(तथाकथित "स्टिकर", जब सफेद ट्यूब उत्पादन, एक व्यवसाय द्वारा खरीदा जाता है, और फिर एक ब्रांड और चिपक गया है, यह "स्टीकर" है; बेशक, व्यापारी भी एक प्रसिद्ध ब्रांड लेबल कर सकते हैं और इसे बेच सकते हैं एक

2021-09-07 10:03:46

Nowadays, people"s aesthetic appreciation of things is constantly improving. They also keep improving on the beauty seam of ceramic tiles, hoping to achieve the best expected effect. But all walks of life are somewhat minefields, do not touch, otherwise it will backfire.

1. Up to now, the market has witnessed a wide variety of sealant products. When purchasing materials, follow the "three do not" principle.

No white tube, no label, no fake.

The so-called "white tube" is the non-brand sealant produced by a OEM. Such sealant is often packaged in white double-tube plastic bottles. As time goes by, people call it "white tube".

The so-called "fake", is the use of shoddy products fake well-known brands, shoddy, fake on behalf of the real.

2. Look for regular stores and choose to consume in stores. If you meet after-sales service, the entity is more guaranteed.

3. Don"t forget to mix well.Remember that before the construction of sealant, it is necessary to hit 40~60cm colloid before formal construction.

4, remember, tile gap to clean up, no floating slurry, no floating ash, no stains, no water.

5, remember to wax the seam.Otherwise, when shoveling glue, if the ceramic tile is hurt, compensation and after-sales will be generated.

6, construction, remember to follow the correct construction sequence.Do kitchen and bathroom first, then do bedroom living room and balcony;At the same time, the first wall, after the ground, step by step, in perfect order.

7. Different types of sealant have different characteristics, and the curing law and time are different. Before construction, be sure to read it in detail.For example, bottled epoxy colored sand only takes 2 hours to surface cure, water-based or oily sealant often takes 5 to 7 hours, the surface can be cured.

8. After the shovel joint on the same day, remember to remind the personnel of the subsequent construction project, do not touch with acid and alkali or sharp objects before completely curing (7 days), otherwise it is very troublesome to rework.

9, after the completion of construction, do not contact a lot of water within 3 days, otherwise it is difficult to cure, and may even lead to internal drying or discoloration of the sealant, affecting the effect of the sealant.

Conclusion: The above is our experience of doing tile adhesive for more than 10 years. It is the minefield that must be avoided to do tile sealant. Only if it is not touched, can we make our own tile sealant beautiful and generous.In addition, Kelin tile grout supplier reminds you that if you do not have this experience, do not try to find professional construction personnel to do it, otherwise you do not understand the characteristics of sealant, there may be a loss.